Build your own DIY Weather Station!
Once set it is setup - upload the code, then you can access real-time temperature and humidity data through any browser connected to the same network. This project is not only a fun weekend activity but also an excellent educational tool for anyone interested in electronics and environmental monitoring.
We sell the kit HERE, or you can use your own parts...
Parts:
- D1 Mini
- DHT11 Sensor
- Wires
- 3D Printed Enclosure (Optional)
- USB Power Supply
- USB Cable
After you upload the code, open the serial monitor and check the IP address. This is what you will put in the address bar of your browser to see the monitoring page.
If you have an 128x64 OLED display the same code is already setup to display information.
Wiring diagram
